Warehouse Waste Reduction Level and Its Impact on Warehouse and Business Performance

  • Khaldoun K Tahboub German Jordanian University
  • Loay Salhieh
Keywords: Lean Thinking, Waste, Warehouse Efficiency, Warehouse Performance, Delphi

Abstract

Warehouses considered as having a strategic role in supporting the overall competitiveness of the supply chain through achieving improved efficiency. Accordingly, lean thinking have recently found its way in the warehouse operations. The aim of this paper is to propose and test a model to assess the level of waste reduction practices and its impact on warehouse and business performance, and to encourage scholars to develop models to assess lean thinking and waste reduction in warehouse operations. A Delphi technique used in order to develop related questionnaires to measure the degree of waste reduction in the different warehouse activities. The results suggested the existence of a positive relationship between waste reduction activities and business performance and warehouse operational performance. Finally, this paper provides practical implications for warehouse and supply chains managers and directions for future researchers in this field.

Author Biography

Khaldoun K Tahboub, German Jordanian University
Associate Professor, Department of Logistics Sciences

References

Abdel-Maksoud, A., Dugdale, D. & Luther, R. (2005). Non-financial performance measurement in manufacturing companies. The British Accounting Review. 37(3): 261-297.
Akkermans, H.A., Bogerd, P., Yucesan, E & van Wassenhove, L. (2003). The impact of ERP on supply chain management: exploratory findings from a European Delphi study. European Journal of Operational Research. 146(2): 284-301.
Anand, G. & Kodali, R. (2009). Development of a framework for lean manufacturing systems. International Journal Services and Operations Management. 5(5): 687-716.
Armstrong, J. & Overton, T. (1977). Estimating nonresponse bias in mail surveys. Journal of Marketing Research. 14(3): 396-402.
Bartholdi, J.J. & Hackman, S.T. (2008). Warehouse & Distribution Science: Release 0.89. Supply Chain and Logistics Institute.
Bicheno, J. & Holweg, M. (2009). The Lean Toolbox. The Essential Guide to Lean Transformation, Picsie Books, Buckingham.
Blind, K., Cuhls, K. & Grupp, H. (2001). Personal attitudes in the assessment of the future of science and technology: a factor analysis approach. Technological Forecasting and Social Change, 68(2): 131-149.
Bollen, K. & Long, J. (1993). Testing Structural Equation Models, Sage Publications, Newbury Park, CA.
Bowersox, D. J., Closs, D.J., Cooper, M. B. & Bowersox, J. C. (2013). Supply Chain Logistics Management, Fourth Edition, McGraw Hill International Edition.
Bozer, Y.A. (2012). Developing and Adapting Lean Tools/Techniques to Build New Curriculum/Training Program in Warehousing and Logistics, University of Michigan Ann Arbor, MI 48109-2117.
Brandao de Souza, L. (2009). Trends and approaches in lean healthcare. Leadership in Health Services 22(2), 121-139.
Brill, J.M., Bishop, M.J. & Walker, A.E. (2006). The competencies and characteristics required of an effective project manager: a web-based Delphi study. Educational Technology, Research and Development. 54(2): 115-140.
Brooks, K. W. (1979). Delphi technique: Expanding applications. North Central Association Quarterly. 54(3): 377-385.
Byrne, B. 1994. Structural Equation Modelling with EQS and EQS/Windows: Basic Concepts, Applications, and Programming, Sage Publications, Thousand Oaks, CA.
Callen, J.L., Fader, C. & Krinsky, I. (2000). Just-in-time: a cross-sectional plant analysis. International Journal of Production Economics 63(3): 277-301.
Cardinaels, E. & Veen-Dirks, P.M.V. (2010). Financial versus non-financial information: the impact of information organization and presentation in a balanced scorecard. Accounting, Organizations and Society. 35(6): 565-578.
Castle, A. & Harvey, R. (2009). Lean information management: the use of observational data in health care. International Journal of Productivity and Performance Management, 58(3): 280-99.
Chau, P. (1997). Re-examining a model for evaluating information center success using a structural equation modelling approach. Decision Sciences. 28(2): 309-34.
Clercq, D.D., Dimov, D. & Thongpapanl, N.T. (2010). The moderating impact of internal social exchange processes on the entrepreneurial orientation–performance relationship. Journal of Business Venturing. 25(1): 87-103.
Coakes, S.J. & Steed, L. (2007). SPSS 14.0 for Windows: Analysis without Anguish, Wiley, Richmond.
Cooper, D.R. & Schindler, P.S. (2003). Business Research Methods, McGraw-Hill/Irwin, New York, NY.
Crawford, K.M., Blackstoe, J.H. & Cox, J.M. Jr (1988). A study of JIT implementation and operating problems. International Journal of Production Research. 26(9): 1561-1568.
Cua, K.O., McKone, K.E. & Schroeder, R.G. (2001). Relationships between implementation of TQM, JIT, and TPM and manufacturing performance. Journal of Operations Management. 19(6): 675-694.
Custer, R. L., Scarcella, J. A., & Stewart, B. R. (1999). The modified Delphi technique: A rotational modification. Journal of Vocational and Technical Education. 15(2): 1-10.
Cyphert, F. R., & Gant, W. L. (1971). The Delphi technique: A case study. Phi Delta Kappan, 52(5): 272-273.
Dalkey, N. & Helmer, O. (1963). An experimental application of the DELPHI method to the use of experts. Management Science. 9(3): 458-467.
Dalkey, N. C. (1969). An experimental study of group opinion. Futures. 1(5): 408-426.
De Koster, M.B.M. (2008). Warehouse assessment in a single tour, in Facility Logistics. Approaches and Solutions to Next Generation Challenges, Lahmar, M. (ed), Taylor&Francis,Auerbach,NY. 39–60.
Demeter, K., & Matyusz, Z. (2011). The impact of lean practices on inventory turnover. International Journal of Production Economics. 133(1): 154-163.
Dillman, D. (1978). Mail and Telephone Surveys: The Total Design Method, John Wiley. New York, NY.
Ellis, P.D. (2006). Market orientation and performance: a meta-analysis and cross-national comparisons. Journal of Management Studies. 43(5): 1089-1107.
Fine A. B., Hannam R., Morra. D. (2009). Leading Lean: A Canadian Healthcare Leader's Guide. Healthcare Quarterly. 12(3): 32-41.
Frazelle. E. (2002). World-class warehousing and material handling. New York, NY: McGraw-Hill.
Fullerton, R.R., McWatters, C.S. & Fawson, C. (2003). An examination of the relationship between JIT and financial performance. Journal of Operations Management. 21(4): 383-404.
Gagliardi, J.P., Renaud, J. & Ruiz, A. (2012). Models for automated storage and retrieval systems: a literature review. International Journal of Production Research, 50(24): 7110-7125.
Garcia, Frank C. (2003). Applying Lean Warehouse Operation, Bristol, PA, USA.
Green, P.J. (1982). The content of a college-level outdoor leadership course for land-based outdoor pursuits in the Pacific Northwest: A Delphi consensus. Microform Publications, College of Health, Physical Education and Recreation, University of Oregon.
Gu, J., Goetschalckx, M. & McGinnis, L.F. (2010). Research on warehouse design and performance evaluation: A comprehensive review. European Journal of Operational Research. 203(3): 539-549.
Gudehus, T. & H. Kotzab (2012). Comprehensive logistics (2nd ed.). Heidelberg and and New York: Springer-Verlag Berlin Heidelberg.
Hackman, S.T., E.H. Frazelle, P.M., Griffin, S.O. Griffin, D.A. Vlatsa (2001). Benchmarking Warehousing and Distribution Operations: An Input-Output Approach. Journal of Productivity Analysis. 16(1): 79-100.
Hair, J.F., Black, W.C., Babin, B.J. & Anderson, R.E. (2010). Multivariate Data Analysis: A Global Perspective, Pearson Education, Upper Saddle River, NJ.
Hicks, B.J. (2007). Lean information management: understanding and eliminating waste. International Journal of Information Management. 27(4): 233-49.
Hines, P., Holweg, M. & Rich, N. (2004). Learning to evolve-a review of contemporary lean thinking. International Journal of Operations and Production Management. 24 (9-10): 994-1011.
Holweg, M. (2007). The genealogy of lean production. Journal of Operations Management. 25(2): 420-437.
Jaca, C., Santos, J., Errasti, A., & Viles, E. (2012). Lean thinking with improvement teams in retail distribution: a case study. Total Quality Management & Business Excellence, 23(3-4): 449-465.
Jarvis, R., Curran, J., Kitching, J. & Lightfoot, G. (2000). The use of quantitative and qualitative criteria in the measurement of performance in small firms. Journal of Small Business and Enterprise Development, 7(2): 123-134.
Jöreskog, K.G. & Söbom, D. (1993). LISREL 8: Structural Equation Modelling with the SIMPLIS Command Language, Scientific Software International, Chicago, IL.
Kaiser, H.F. (1974). An index of factorial simplicity, Psychometrika, 39(1): 31-36.
Karlin, J.N. & Liker, J.K. (2005). Just-in-time and trucking logistics: the Lean learning enterprise. in Belman, D. & White, C.C. (Eds), Trucking in the Age of Information, Ashgate Publishing Company, Burlington, VT, 213-46.
Keeney, S., Hasson, F. & McKenna, H.P. (2001). A critical review of the Delphi technique as a research methodology for nursing. International Journal of Nursing Studies 38(2): 195-200.
Kinney, M.R. & Wempe, W.F. (2002). Further evidence on the extent and origins of JIT’s profitability effects. The Accounting Review. 77(1): 203-225.
Krafcik, J.F. (1988). Triumph of the lean production system. Sloan Management Review. 30(1): 41-52.
Kraus, S., Rigtering, J.C., Hughes, M. & Hosman, V. (2012). Entrepreneurial orientation and the business performance of SMEs: a quantitative study from the Netherlands. Review of Managerial Science. 6(2): 161-182.
Kumar, M., Antony, J., Singh, K. R., Tiwari, K. M. & Perry, D. (2006). Implementing the Lean Sigma framework in an Indian SME: a case study. Production Planning & Control. 17(4): 407-423.
Kumar, S., Singh, B., Qadri, M.A., Kumar, Y.V.S. & Haleem, A. (2013). A framework for comparative evaluation of lean performance of firms using fuzzy TOPSI. International Journal of Productivity and Quality Management. 11(4): 371-392.
Laugen, B.T., Acur, N., Boer, H. & Frick, J. (2005). Best manufacturing practices: what do the best-performing companies do? International Journal of Operations & Production Management. 25(2): 131-150.
Laureani, A. & Antony, J. (2011). Reducing employees’ turnover in transactional services: a Lean Six Sigma case study. International Journal of Productivity and Performance Management. 59(7): 688-700.
Liker, J. K. (2004). The Toyota way: 14 management principles from the world’s greatest manufacturer. New York: McGraw-Hill.
Linstone, H. A., & Turoff, M. (1975). Introduction. in H. A. Linstone, & M. Turoff (Eds.). The Delphi method: Techniques and applications (pp. 3-12). Reading, MA: Addison-Wesley Publishing Company.
Ludwig, B. (1997). Predicting the future: Have you considered using the Delphi methodology? Journal of Extension, 35(5): 1-4.
MacDuffie, J.P. (1995). Human resource bundles and manufacturing performance – organizational logic and flexible production system in the world auto industry. Industrial and Labor Relations Review. 48(2): 197-221.
March, J.G. & Sutton, R.I. (1997). Organizational performance as a dependent variable Organizational Science, 8(6): 698-706.
Martino, J. P. (1983). Technological forecasting for decision making. New York: North-Holland.
McGuire, D. & Cseh, M. (2006). The development of the field of HRD: a Delphi study. Journal of European Industrial Training. 30(8): 653-667.
McLeod, J. & Childs, S. (2007). Consulting records management oracles – a Delphi in practice. Archival Science, 7(2), 147-166.
Melnyk, S.A., Lummus, R.R., Vokurka, R.J., Burns, L.J. & Sandor, J. (2009). Mapping the future of supply chain management: a Delphi study, International Journal of Production Research, 47(16): 4629-4653.
Mia, L. (2000). Just-in-time manufacturing, management accounting systems and profitability. Accounting and Business Research. 30(2): 137-151.
Miller, C. C., Washburn, N. T., & Glick, W. H. (2013). Perspective—the myth of firm performance. Organization Science. 24(3): 948-964.
Miller, L. E. (2006). Determining what could/should be: The Delphi technique and its application. Paper presented at the meeting of the 2006 annual meeting of the Mid-Western Educational Research Association, Columbus, Ohio.
Muraira, E., Garzafox, L. & Villarreal, B. (2014). Increasing Customer Satisfaction through Lean Distribution. Proceedings of the 2014 International Conference on Industrial Engineering and Operations Management. Bali, Indonesia, January 7 – 9, 2014.
Myerson, P. (2012). Lean supply chain and logistics management, McGraw-Hill, New York.
Naman, J.L. & Slevin, D.P. (1993). Entrepreneurship and the concept of fit: a model and empirical tests. Strategic Management Journal. 14(2): 137-153.
Naylor, J.B., Naim, M. & Berry, D. (1999). Leagility: Integrating the lean and agile manufacturing paradigms in the total supply chain. International Journal of Production Economics, 62(1): 107-118.
Neely, A., Gregory, M. & Platts, K. (2005). Performance measurement system design, a literature review and research agenda. International Journal of Operations & Production Management. 25(12): 1228-1263
Ogden, J.A., Petersen, K.J., Carter, J.R. & Monzka, R.M. (2005). Supply management strategies for the future: a Delphi study. Journal of Supply Chain Management. 41(3): 29-48.
Ohno, T. (1988). Toyota Production System: Beyond Large-Scale Production. crc Press.
Okoli, C. & Pawlowski, S.D. (2004). The Delphi method as a research tool: an example, design considerations and applications. Information & Management. 42(1): 15-29.
Pedersen, E.R.G. & Huniche, M. (2011). Negotiating lean – the fluidity and solidity of new management technologies in the Danish public sector. International Journal of Productivity and Performance Management. 60(6): 550-66.
Petty, N. J., Thomson, O. P. & Stew, G. (2012). Ready for a paradigm shift? Part 2: Introducing qualitative research methodologies and methods. Manual Therapy. 17(5): 378-384.
Piecyk, M.I. & McKinnon, A.C. (2010). Forecasting the carbon footprint of road freight transport in 2020. International Journal of Production Economics. 128(1): 31-42.
Piercy, N. & Rich, N. (2009). Lean transformation in the pure service environment: the case of the call service center. International Journal of Operations & Production Management. 29(1): 54-76.
Richard, P.J., Devinney, T.M., Yip, G.S. & Johnson, G. (2009). Measuring organizational performance: towards methodological best practice. Journal of Management. 35(5): 718-804.
Rowe, G. & Wright, G. (1999). The Delphi technique as a forecasting tool: Issues and analysis. International Journal of Forecasting. 15(4): 353 -375.
Sawhney, R., Subburaman, K., Sonntag, C., Rao, P.R.V. & Capizzi, C. (2010). A modified FMEA approach to enhance reliability of lean systems. International Journal of Quality & Reliability Management. 27(7): 832-855.
Schmidt, R.C. (1997). Managing Delphi surveys using nonparametric statistical techniques. Decision Sciences. 28(3): 763-74.
Shah, R. & Ward, P.T. (2003). Lean manufacturing: context, practice bundles, and performance. Journal of OperationsManagement. 21(2): 129-149.
Shah, R. & Ward, P.T. (2007). Defining and developing measures of lean production, Journal of Operations Management. 25(4): 785-805.
Sharma, S. & Shah B. (2015). A proposed hybrid storage assignment framework: a case study. Journal of Operations Management, 25(4): 785-805
Shetty, D., Ali, A. & Cummings, R. (2010). Survey-based spreadsheet model on lean implementation. International Journal of Lean Six Sigma, 1(4): 310-334.
Silvestro, R. (2014). Performance topology mapping: understanding the drivers of performance. International Journal of Production Economics. 156(1): 269-282.
Singh, B., Garg, S.K., Sharma, S.K. & Grewal, C. (2010). Lean implementation and its benefits to production industry. International Journal of Lean Six Sigma. 1(2): 157-168.
Sitlington, H., & Coetzer, A. (2015). Using the Delphi technique to support curriculum development. Education + Training. 57(3): 306 – 321.
Smith, B. (2003). Lean and Six Sigma - A One-Two Punch. Quality Progress, 36(4): 37-41.
Stank, T.P., Rogers, D.S. & Daugherty, P.J. (1994). Benchmarking: applications by third party warehousing firms. Logistics and Transportation Review. 30(1): 55–72.
Sternberg, H., & Lina Harispuru, L. (2016). Identifying root causes of inefficiencies in road haulage: case studies from Sweden, Switzerland and Germany. International Journal of Logistics Research and Applications. October: 1-11
Sternberg, H., Stefansson, G., Westernberg, E., Genna¨s, R.B., Allenstrom, E. & Nauska, M.L. (2013). Applying lean approach to identify waste in motor carrier operation. International Journal of Productivity and Performance Management. 62(1): 47-65.
Swank, C. K. (2003). The lean service machine. Harvard Business Review. 81(10): 123-130.
Tompkins, J.M., & Smith, J.D. (1998). Warehouse Management Handbook. Tompkins Press.
Van den Berg, J.P. & Zijm, J.P. (1999). Models for warehouse management: classification and examples. International Journal of Production Economics. 59(1): 519-28.
Venkatraman, N. & Ramanujam, V. (1986). Measurement of business performance in strategy research: a comparison of approaches. Academy of Management Review, 11(4): 801-14.
Villarreal, B., Garcia, D., & Rosas, I. (2009). Eliminating transportation waste in food distribution: a case study. Transportation Journal 48 (4): 72-77.
Von der Gracht, H.A. & Darkow, I.L. (2010). Scenarios for the logistics services industry: a Delphi-based analysis for 2025. International Journal of Production Economics, 127(1): 46-59.
Wall, T.D., Michie, J., Patterson, M., Wood, S.J., Sheehan, M., Clegg, C.W. & West, M. (2004). On the validity of subjective measures of company performance. Personnel Psychology. 57(1): 95-118.
Warnecke, H.J. & Huber, M. (1995). Lean Production. International Journal Production Economics. 41(1-3): 37–43.
Wiklund, J. & Shepherd, D. (2005). Entrepreneurial orientation and small business performance: a configurational approach. Journal of Business Venturing. 20(1): 71-89.
Womack, J., Jones, D.T. & Ross, D. (1990). The Machine that Changed the World, Rawson Associates, New York, NY.
Womack, J.P. & Jones, D.T. (1996). Lean Thinking: Banish Waste and Create Wealth in your Corporation, New York: Simon and Schuster.
Womack, J.P. & Jones, D.T. (2005). Lean consumption. Harvard Business Review. 83 (3), 58-68.
Womack, J.P., Jones, D.T. (2003). Lean Thinking, 2nd ed. London, Simon & Schuster.
Wood, E.H. (2006). The internal predictors of business performance in small firms. Journal of Small Business and Enterprise Development. 13(3): 441-452.
Yang, M. G. M., Hong, P., & Modi, S. B. (2011). Impact of lean manufacturing and environmental management on business performance: an empirical study of manufacturing firms. International Journal of Production Economics, 129(2): 251-261.
Published
2019-12-30
How to Cite
Tahboub, K. K., & Salhieh, L. (2019). Warehouse Waste Reduction Level and Its Impact on Warehouse and Business Performance. Industrial and Systems Engineering Review, 7(2), 85-101. https://doi.org/10.37266/ISER.2019v7i2.pp85-101