A Proposed Framework in Developing Sustainable Manufacturing Initiatives Using Analytic Hierarchy Process (AHP)

  • Lanndon Ocampo University of San Carlos
  • Eppie Clark De La Salle University

Abstract

This paper proposes an evaluation framework of input elements in developing sustainable manufacturing (SM) initiatives using the hierarchical structure of sustainability indicators set developed by the US National Institute of Standards and Technology (US NIST) and the analytic hierarchy process (AHP). Determining priority input elements in the development process is essential to ensure that SM initiatives are responsive to the demands of sustainability at firm level. This evaluation exposes a challenge due to the multi-criteria nature of the problem and the presence of subjective criteria with limited available information on their measurement systems. The use of AHP in the context of the hierarchical structure of the US NIST sustainability indicators set provides a comprehensive and promising approach in identifying fundamental inputs in developing effective programs and initiatives that address sustainability. The contribution of this work lies on presenting a framework that could guide decision-makers, in a way that is simple and comprehensive, in their attempt to promote sustainability. Results and implications are reported in this work.

Author Biographies

Lanndon Ocampo, University of San Carlos
Department of Mechanical Engineering
Eppie Clark, De La Salle University
Department of Industrial Engineering

References

Alonso, J.A. and Lamata, M.T. (2006). Consistency in the Analytic Hierarchy Process: a new approach. International Journal of Uncertainty, Fuzziness and Knowledge-Based Systems, 14(4), 445-459.

Baskaran, V., Nachiappan, S. and Rahman, S. (2012). Indian textile suppliers’ sustainability evaluation using the grey approach. International Journal of Production Economics, 135(2), 647-658.

Böhringer, C. and Jochem, P.E.P. (2007). Measuring the immesurable – A survey of sustainability indices. Ecological Indicators, 63(1), 1-8.

Brundtland, G.H. (1987). Report of the world commission on environment and development: Our common future. Oxford, UK, Oxford University Press, p. 6.

Chaabane, A., Ramudhin, A. and Paquet, M. (2012). Design of sustainable supply chains under the emission trading scheme. International Journal of Production Economics, 135(1), 37-49.

Chatzimouratidis, A. and Pilavachi, P. (2009). Technological, economic and sustainability evaluation of power plants using the Analytic Hierarchy Process. Energy Policy, 37(3), 778-787.

Chen, C.C., Shih, H.S., Shyur, H.J. and Wu, K.S. (2012). A business strategy selection of green supply chain management via an analytic network process. Computers and Mathematics with Applications, 64(8), 2544-2557.

Chiacchio, M.S. (2011). Early impact assessment for sustainable development of enabling technologies. Total Quality Management and Excellence, 39(3), 1-6.

Cho, K.T. (2003). Multicriteria decision methods: an attempt to evaluate and unify. Mathematical and Computer Modeling, 37(9-10), 1099-1119.

de Brucker, K., Macharis, C. and Verbeke, A. (2013). Multi-criteria analysis and the resolution of sustainable development dilemmas: a stakeholder management approach. European Journal of Operational Research, 224(1), 122-131.

de Silva, N., Jawahir, I.S., Dillon, Jr. O. and Russell, M. (2009). A new comprehensive methodology for the evaluation of product sustainability at the design and development stage of consumer electronic products. International Journal of Sustainable Manufacturing, 1(3), 251-264.

Elkington, J. (1997). Cannibals with Forks: The Triple Bottom Line of 21st Century Business. Oxford: Capstone.

Garbie, I.H. (2011). Framework of manufacturing enterprises sustainability incorporating globalization issues. In: Proceedings of the 41st International Conference on Computers and Industrial Engineering, Los Angeles, CA USA.

Gupta, A., Vangari, R., Jayal, A. D. and Jawahir, I. S. (2011). Priority evaluation of product metrics for sustainable manufacturing. In: A. Bernard, editor. Global Product Development, Springer-Verlag Berlin Heidelberg, 631-641.

Heijungs, R., Huppes, G. and Guinee, J.B. (2010). Life cycle assessment and sustainability analysis of products, materials and technologies: toward a scientific framework for sustainability life cycle analysis. Polymer Degradation and Stability, 95(3), 422-428.

Herva, M. and Roca, E. (2013). Review of combined approaches and multi-criteria analysis for corporate environmental evaluation. Journal of Cleaner Production, 39, 355-371.

Jain, S. and Kibira, D. (2010). A framework for multi-resolution modeling of sustainable manufacturing. In: Proceedings of the 2010 Winter Simulation Conference, B. Johansson, S. Jain, J. Montoya-Torres, J. Hugan, and E. Yücesan, eds., 3423-3434.

Jawahir, I.S., Rouch, K.E., Dillon, O.W., Holloway, L. and Hall, A. (2007). Design for Sustainability (DFS): New Challenges in Developing and Implementing a Curriculum for Next Generation Design and Manufacturing Engineers. International Journal of Engineering Education, 23(6), 1053-1064.

Joung, C.B, Carrell, J., Sarkar, P. and Feng, S.C. (2013). Categorization of indicators for sustainable manufacturing. Ecological Indicators, 24, 148-157.

Kovac, M. (2012). Comparison of foresights in the manufacturing research. Transfer Inovacii, 23, 284-288.

Krajnc, D. and Glavic, P. (2005). A model for integrated assessment of sustainable development. Resources, Conservation and Recycling, 43(2), 189-208.

Kravanja, Z. and Cucek, L. (2013). Multi-objective optimization for generating sustainable solutions considering total effects on the environment. Applied Energy, 101, 67-80.

Mayer, A.L. (2008). Strengths and weaknesses of common sustainability indices for multidimensional systems. Environment International, 34(2), 277-291.

Promentilla, M.A.B., Furuichi, T., Ishii, K. and Tanikawa, N. (2006). Evaluation of remedial countermeasures using the analytic network process. Waste Management, 26(12), 1410-1421.

Ragas, A.M.J., Knapen, M.J., van de Heuvel, P.J.M., Eijkenboom, R.G.F.T.M., Buise, C.L. and van de Laar, B.J. (1995). Towards a sustainability indicator for production systems. Journal of Cleaner Production, 3(1-2), 123-129.

Rosen, M.A., and Kishawy, H.A. (2012). Sustainable manufacturing and design: concepts, practices and needs. Sustainability, 4(2), 154-174.

Saaty, T. L. (1980). The Analytic Hierarchy Process. McGraw-Hill, New York.

Saaty, T. L. (2007). Time dependent decision-making; dynamic priorities in the AHP/ANP: Generalizing from points to functions and from real to complex variables. Mathematical and Computer Modelling, 46(7-8), 860-891.

Saaty, T. L. (2008). The analytic hierarchy and analytic network measurement processes: applications to decisions under risk. European Journal of Pure and Applied Mathematics, 1(1), 122-196.

Singh, R.K., Murty, H.R., Gupta, S.K. and Dikshit, A.K. (2012). An overview of sustainability assessment methodologies. Ecological Indicators, 15(1), 281-299.

SMIR. (2011). Sustainable Manufacturing Indicator Repository, http://www.nist.gov/el/msid/smir.cfm

Subramanian, N. and Ramanathan, R. (2012). A review of applications of analytic hierarchy process in operations management. International Journal of Production Economics, 138(2), 215-241.

Tseng, M.L., Chiang, J.H. and Lan, L.W. (2009a). Selection of optimal supplier in supply chain management strategy with analytic network process and choquet integral. Computers and Industrial Engineering, 57(1), 330-340.

Tseng, M.L., Divinagracia, L. and Divinagracia, R. (2009b). Evaluating firm’s sustainable production indicators in uncertainty. Computers and Industrial Engineering, 57(4), 1393-1403.

Vaidya, O.S. and Kumar, S. (2006). Analytic hierarchy process: an overview of applications. European Journal of Operational Research, 169(1), 1-29.

Vinodh, S. and Jeya Girubha, R. (2012). PROMETHEE based sustainable concept selection. Applied Mathematical Modelling, 36(11), 5301-5308.

Published
2015-01-20
How to Cite
Ocampo, L., & Clark, E. (2015). A Proposed Framework in Developing Sustainable Manufacturing Initiatives Using Analytic Hierarchy Process (AHP). Industrial and Systems Engineering Review, 3(1), 7-16. Retrieved from http://watsonojs.binghamton.edu/index.php/iser/article/view/28